Archives des Protection & Shims - NÖVLEK https://novlek.com/en/product-category/protection-shims/ Solutions for timber decking and cladding Fri, 06 Sep 2024 04:24:51 +0000 en-US hourly 1 https://wordpress.org/?v=6.1.10 https://novlek.com/wp-content/uploads/2024/03/cropped-Novlek_logo_fav-1-32x32.png Archives des Protection & Shims - NÖVLEK https://novlek.com/en/product-category/protection-shims/ 32 32 Isolation shims https://novlek.com/en/product/deck-isolation-shims/ Tue, 09 Jul 2019 10:13:56 +0000 http://novlek.com/product/cales-isolation/ Wooden joists should always be isolated from the ground with shim systems.
The NÖVLEK® isolation shims isolate the timber joists from the ground and ensure they always stay dry. The use of NÖVLEK® isolation shims prevents the risk of degradation and premature rotting of joists.

L’article Isolation shims est apparu en premier sur NÖVLEK.

]]>

Wooden joists should never be placed on the ground or even directly on their support structures such as concrete blocks or ground beams.

BENEFITS

WATER DRAINAGE
SYSTEM

COMPLETELY WATERPROOF
NON-POROUS MATERIAL

EXCEPTIONAL COMPRESSION
RESISTANCE

COMPLETE VENTILATION OF THE WOOD
ELIMINATES WATER RETENTION AREAS

MAXIMUM
SOUND INSULATION

EXTREMELY DURABLE

QUICK AND EASY TO INSTALL
POSITIONING
MARKS

SHOCK-ABSORBING
GREATER COMFORT

UNCOMPROMISING QUALITY
AND PERFORMANCE

COMPLIANCE DTU 51.4

The NÖVLEK® isolation shims comply fully with the requirements of the NF DTU 51.4 standard as regards shims for the installation of joists.

USE

Increased stability and lifespan

The multiplicity of channels on the surface ensure ventilation and effective water runoff. There is no risk of water retention between shim and joist, and between shim and ground. This significantly improves stability and durability of the joists.

Stackable and combinable with each other

The isolation shims stack and combine together to the height wanted or required by standards in force.

Screwing the shim on the underside of the joist

It is recommended to screw the shims under the structure, to prevent them from moving when the joists are being adjusted during laying, or subsequently over time. Guaranteed to save time.

Placement indicators

Ensure precise positioning and very speedy installation.

RANGE

6 mm
25 pieces
± 5m2

Epaisseur: 6 mm
Dimensions: 90 x 90 mm

10 mm
25 pieces
± 5m2

Epaisseur: 10 mm
Dimensions: 90 x 90 mm

Téléchargez la fiche technique

L’article Isolation shims est apparu en premier sur NÖVLEK.

]]> Ventilation shims https://novlek.com/en/product/deck-ventilation-shims/ Tue, 09 Jul 2019 10:12:48 +0000 http://novlek.com/product/cales-ventilation/ NÖVLEK® ventilation shims ensure perfect ventilation of the underside of the boards, and prevent water retention at the contact point between board and joist. Using NÖVLEK® ventilation shims significantly improves durability and stability of the decking, and reduces the risk of the boards cupping.

L’article Ventilation shims est apparu en premier sur NÖVLEK.

]]>

The NÖVLEK® ventilation shim slips easily between the board and the joist to ensure their 5 mm separation, in order to ensure they are properly ventilated, and to avoid water retention.

BENEFITS

COMPLETE VENTILATION OF THE WOOD
ELIMINATES WATER RETENTION AREAS

COMPLETELY WATERPROOF
NON-POROUS MATERIAL

EXCEPTIONAL COMPRESSION
RESISTANCE

PROTECTION OF THE JOIST
WITH FULL CAPPING

JOIST COVERED AND INVISIBLE

EXTREMELY DURABLE

QUICK AND EASY TO INSTALL
POSITIONING STOPS

STACKABLE
SHIMMING AND LEVELLING

UNCOMPROMISING QUALITY
AND PERFORMANCE

COMPLIANCE DTU 51.4

The NÖVLEK® ventilation shim complies fully with the requirements of the NF DTU 51.4 standard as regards detachment of the board from its support and for shimming.

USE

In order to reduce the risk of water and moisture being trapped between boards and joists, it is strongly recommended that the board be detached from its supporting surface using the NÖVLEK® ventilation shims.

The ventilation shim is simply slipped between the board and the joist.

Cale de départ et de fin

The ventilation shims are supplied with start and end shims. Stainless steel screws are supplied to fix them to joists, so that they do not move when the first board is being adjusted.

Suitable for installation with screws or invisible fasteners.

The shims are suitable both for decking installed with conventional screws from above, or with invisible fasteners.

No matter what direction the joists are laid.

The shims are fitted on both the smaller or larger width of the joist.

Use as a wedge system

The shims stack and interlock to separate the joists from the ground or as a levelling shim.

RANGE

± 19m2*

Width: 65 mm
Thickness: 5 mm

*Estimate based on board thickness of 140 mm and joists centre to centre distance of 45 cm

± 6m2*

Width: 65 mm
Thickness: 5 mm

*Estimate based on board thickness of 140 mm and joists centre to centre distance of 45 cm

Téléchargez la fiche technique

L’article Ventilation shims est apparu en premier sur NÖVLEK.

]]> Bituminous strip https://novlek.com/en/product/deck-bituminous-strip/ Tue, 09 Jul 2019 10:11:28 +0000 http://novlek.com/product/bande-bitumineuse/ The NÖVLEK® bituminous strip protects the upper surface and sides of the joist from water. Because it is waterproof, water runs off and is discharged easily. It prevents run-off water penetrating the many cracks and splits in the wood, which appear after a while, especially around screw holes. It avoids wood-on-wood contact, and also any rising damp.
It is strongly recommended for wooden joists with a natural durability classification greater than 1.

L’article Bituminous strip est apparu en premier sur NÖVLEK.

]]>

Overhanging
The NÖVLEK® bituminous strip is 60, 80 or 100 mm wide, so it overhangs either side of the joist, whether laid along its narrow or wide side.

Umbrella effect
The overhanging edges of the strip curve slightly after laying, giving it an umbrella shape which prevents water running along the sides of the joist.

BENEFITS

OVERHANGING
UMBRELLA EFFECT FOR
DISCHARGING WATER

COMPLETELY WATERPROOF

EXCEPTIONAL COMPRESSION
RESISTANCE

RETAINS ITS SHAPE
IN THE HEAT

MAXIMUM SOUND
INSULATION

EXTREMELY DURABLE
30+ YEAR LIFESPAN

POLYESTER REINFORCEMENT
TEARPROOF

SHOCK-ABSORBING
GREATER COMFORT

UNCOMPROMISING QUALITY
AND PERFORMANCE

COMPLIANCE DTU 51.4

NÖVLEK® bituminous strip complies fully with the requirements of the NF DTU 51.4 standard as regards protection of the upper surface of the joists.

USE

using the NÖVLEK® bituminous strip prevents the risk of damage and premature rotting in the joists.

Quick and easy to lay

Some widely-spaced staples or nails are sufficient to hold it in place, before the boards are laid.
The strip unrolls and aligns itself automatically on the supporting surface, thanks to its exceptional stiffness.

1.9mm for maximum shock-absorption

The composition of the strip and its 1.9 mm thickness give it outstanding absorbent and shock-absorbing qualities, ensuring unbeatable comfort.

Additional to the ventilation interface shim

The bituminous strip protects the joist, while the ventilation shim ensures the underside of the boards is ventilated by separating them from the joist. Both guarantee durability of the decking

The joist is no longer visible

The bituminous strip conceals the joist completely in the spaces between boards.

RANGE

± 6m2*

Width: 60 mm
Length: 20 m

* Evaluation sur base d’une structure simple

± 6m2*

Width: 80 mm
Length: 20 m

* Evaluation sur base d’une structure simple

± 6m2*

Width: 100 mm
Length: 20 m

* Evaluation sur base d’une structure simple

Téléchargez la fiche technique

L’article Bituminous strip est apparu en premier sur NÖVLEK.

]]>