D4 PU glue

The plugs must be glued with a polyurethane (PU) wood glue D4 (NF EN 204).

Leave the plug to protrude 2 to 3 mm

For a perfect finish, with the plugs completely flush, leave the plug some 2 to 3 mm proud of the surface so it can be easily cut back.
The ideal drilling depth is 7 mm.

Cutting

To ensure the plug is completely flush with the surface of the structure, it must be cut with a hand saw (flexible blade with Japanese teeth) or a perfectly sharpened wood chisel. The cut must be made in the direction of the wood grain of the plug.

A perfect result

The quality of the insertion and the cut, as well as respect for the installation rules, ensure a perfect, durable result.

Only one hand needed

Manipulated and operated with one hand, suitable for right- and left-handed use.
Gradual, effortless tightening with the comfortable trigger.

Adjusted once and for all

Tool unlocked for removal with the front trigger.
The jaw spacing is adjusted and locked automatically for the entire job, saving considerable time and making it extremely easy to use.

Narrow boards

The NÖVLEK® board clamps can be used with narrow boards. In this case, a sacrificial shim is needed. It can be screwed to the jaw temporarily, with the two holes provided for this purpose.

Can be used with the DROP™ profile

A short bracket is available for use with boards having the DROP™ covering profile (from NÖVLEK®) or similar.

L’utilisation simultanée de plusieurs serres-lames améliore significativement l’efficacité, la qualité et la rapidité de pose.

Convient pour la pose de lames de bardage, aussi bien verticales qu’horizontales.

• Does not damage the edge of the boards, or the joists.
• Allows tightening and straightening up to the last board.
• Can be placed anywhere, alone or with several aligned side by side, when the situation requires it.
• No limit on its use:
  • even in the narrowest areas or close to an obstacle;
  • on the connections and spacers between joists;
  • whatever the height, width or material of the joists or beams;
  • regardless of whether the joists are covered by overhanging bituminous strips;
• Acts only on the board, without applying any force to the joist.
  There is no risk of displacing or distorting the joist.
• Keeps the finishing boards in place before they are screwed.

No marks on the wood

To ensure a perfect result, hold the depth stop between two fingers to stop it rotating and avoid any shavings which are between the end stop and the board being caught and marking the surface of the wood.
This ensures the shavings are completely removed during drilling.

Clean, burr-free cut

Splinter-free, clean result on all types of wood.

Impeccable finish

The stop adjustment ensures precise countersinking on the board surface so that the screw head fits perfectly.

Adjustment according to the job

The height of the drill can be adjusted, especially to modify the drilling depth to suit the timber being used. A board in an exotic species, laid onto a joist also in an exotic species, requires the joist and board to be drilled through for the full length of the screw. Where the same board is laid onto a joist in a resinous wood only the board needs to be drilled.

Keep the drill at an angle of 90° with respect to the surface being drilled.

The drill must be held fully perpendicular (at 90°) to the surface being drilled, throughout the drilling operation, to avoid breaking it.
The pressure applied to the drilling machine must also be applied in the axis of the drill bit and perpendicular to the surface being drilled.

No marks on the wood

To ensure a perfect result, hold the depth stop between two fingers to stop it rotating and avoid any shavings which are between the end stop and the board being caught and marking the surface of the wood.
This ensures the shavings are completely removed during drilling.

Cylindrical, flat-bottomed hole

The step drill bit for plugs, exclusive to NÖVLEK®, is designed to drill a flat-bottomed cylindrical hole into which the plug will fit perfectly.
The blades ensure a sharp, splinter-free cut in all types of timber.

Adjustment according to the job

The height of the drill can be adjusted, especially to modify the drilling depth to suit the timber being used. A board in an exotic species, laid onto a joist also in an exotic species, requires the joist and board to be drilled through for the full length of the screw. Where the same board is laid onto a joist in a resinous wood only the board needs to be drilled.

Perfectly designed shapes

The exclusive V profile, and the wide handle ensure that the NÖVLEK® spacer is easy to fit and remove.

Ready for all situations

If necessary, a tool such as a wood chisel can fit through the wide, open handle.

Exceptional strength

The exceptional strength of the handle means that significant force can be applied with no risk of breaking.

Designed to the last detail

The chamfered edge of the spacer allows a lever movement to be applied between the boards, in order to release a spacer easily.

1 size – 12 pieces

3 mm (blue)
5 mm (red)
7 mm (yellow)

Mix 3 size mix – 12 pieces

4 x 3 mm – 4 x 5 mm – 4 x 7 mm